|Options||40 hole 145mm OLD -
40 hole 140mm OLD -
48 hole 145mm OLD -
48 hole 140mm OLD -
|Description||Tandem specific rear hub
Shimano cassette compatible 8,9,10 speed or 7 speed with a spacer
Threaded for drag brake
2 cartridge Bearings 6001
145mm OLD (Width)
Steel free hub body
Quick Release (Skewers Included)
spoke hole 2.7mm dia
Flange distance left 29mm right 25mm
PCD is 62mm (diameter)
This hub can be reduced to 140mm OLD or 135mm OLD. Although if your OLD is 135mm it's unlikely you will have room to fit a drag brake even if it had one previously because the flanges are wider apart on this hub than the original will have been.
As with any product, the specification is subject to change without prior notification. You are advised to confirm current specification before buying.